Certifications That Matter
When you specify recovery equipment for a funded or permitted building, documentation is part of the product. The relevant marks include CE, ISO 9001 for quality management, and Eurovent certification for verified performance of air-handling and recovery products.
Why Certification Protects You
- Eurovent certification means an independent lab confirmed the published efficiency
- ISO 9001 shows the factory runs a repeatable process
- CE marks conformity with applicable EU directives
Track Record
The engineering team behind HeatRecoveryHub has supported heat-recovery projects across more than forty countries, from tropical ventilation to sub-zero freezer stores. That field experience feeds directly back into the guidance published here.
Working With Us
Whether you need a single verified core or a specification for a multi-building programme, the starting point is the same: define the duty, pick the technology that fits, and prove the performance with a recognised test method.
Our Approach
The work described in Global Projects & Certifications reflects how we approach heat-recovery equipment: start from the real duty, size the core from measured airflow and temperature, and validate performance before delivery. Rather than offering a generic unit, we match plate, rotary, or heat-pipe construction to the exhaust cleanliness, recovery target, and pressure-drop budget of each application.
Capabilities
Our scope covers design, manufacturing, and testing of air-to-air heat exchangers for HVAC, drying, and process ventilation. We support make-up air units, paint and coating ovens, data-center and inverter cooling, and general industrial ventilation where energy cost is a concern. Standard flanged connections and flexible mounting keep integration straightforward for the installer.
Quality and Standards
Production follows documented quality procedures, with material and leak checks at key stages and performance verification against the stated ratings. Certifications and test records are available so the supplied unit can be audited against the specification. This discipline is what lets a recovery project deliver its predicted saving over the equipment's service life.
Frequently Asked Questions
Can you size from our site data? Yes; send measured airflow and temperatures and we return a core sized for the duty. Do you support retrofits? Most units are built to drop into existing ductwork with minimal change.
Practical Selection Checklist
For the Global Projects & Certifications duty, confirm the measured airflow and the temperature difference between the two airstreams before specifying any unit. Choose the core type that matches the exhaust cleanliness and the recovery target, allow margin for fouling, and verify the pressure drop stays inside the fan curve. Place filtration ahead of the core and provide a condensate drain where the supply side may fall below the dew point.
When to Specify This Solution
Energy recovery suits any plant or building that expels warm exhaust continuously while drawing in fresh air that must be conditioned from ambient. Common candidates include make-up air units, drying rooms, commercial kitchens, paint booths, and general process ventilation. Where the annual cost of heating or cooling make-up air is material, a correctly sized exchanger usually pays back within one to three operating seasons.
Next Steps
Start by logging the supply and exhaust conditions for a full duty cycle, then size the core from those numbers rather than from nameplate estimates. Compare the projected energy saving with the equipment and installation cost to get a payback figure, and review the comparison and product guides for the specific configuration that fits your site.